HID emergency light

Description:

Automatic Emergency Light, Medium quality, metal body,
Product: HID rechargeable portable emergency lamp, wall mounted.

 

Automatic Emergency Light, Medium quality,metal body,

 

 

Emergency light (AC220V, DC12V,incandescent, wall-type only, valid lighting duration : 60minutes)
rated input current	23mA	light speed standard voltage	13V
rated input current	3W	manufacture number	-
reserved power source	lead-acid battery 12V/6A	manufacturedate	2012.01
Weight	3.9kg

 

This is wall-type emergency light. When it isconnected to normal power source(AC220V), AC power is activated andthe light gets on.
When there is a blackout because of fire or any other accident, theinternal circuit senses it and the light gets on automatically.
This has a status light for emergency power in front for monitoringthe power status.

• Normal : The status light is green.
• Abnormal : the status light is red. Recharging, bad storagebattery, broken fuse, or bad connection causes it.
• Check the light status using the test switch once a month forreliable use.
• When you replace the storage battery, use 12V/5Ah type. Use thespare light(12V/15W) for replacement.
• Call us at 82-70-8100-5525 for questions.
• Emergency light (AC220V, DC12V, incandescent, wall-type, -typeonly, valid lighting duration : 60 minutes)
• Caution : Make sure to connect the internal battery powerconnector after installation.

Exclusive for 12V 55W

• High-intensity : 70W (60 minutes)
• Places of Use : School, military camps,buildings(inside)/hallways/underpasses/factories/for work/forsecurity
• Attachment method : Mounting
• Materials : Flameproof ABS resin
• Dimension : 275(W)×295(H)×110(D)m/m
• Lens :125m/m

This high-intensity lighting product employs two35W HID lamps, producing highly bright lighting so people are ableto escape from the place in times of emergency. Its lens has anoptical design to make an irradiated area as even, wide, and brightas possible.

 

Product Features

• The product is automatically lit immediately upon detection bythe internal circuit in times of emergency such as blackout orother accident.
• Operation status switch : The test key is pressed to confirmits normal operation
• Adjustment of lamp angel : The head can be adjusted alldirections depending on the structure of a building
• Emergency power status lamp : the colors display variousstatuses such as charging and abnormality
  · Green lamp(on) : Normal (during charging or fully charged formore than 48 hours)
  · Red lamp (on) : Abnormal (during charging, battery in poorcondition, or broken fuse)
• Protective circuit for battery : Designed to be free fromover-charging
• Charging input power : AC220V, DC12V
• Time to full charging : 48 hours/Maximum operating time : 100minutes (±10 min)

Emergency light MICHAEL-2000

1. This is wall-type emergency light. When it is connected tonormal power source (AC220V), AC power is activated and the lightgets on.
2. When there is a blackout because of fire or any other accident,the internal circuit senses it and the light gets onautomatically
3. This has a status light for emergency power in front formonitoring the power status
   · Normal : The status light is green
   · Abnormal : The status light is red. Recharging, bad storagebattery, broken fuse, or bad connection causes it.
4. Check the light status using the test switch once a month forreliable use.
5. When you replace the storage battery, use 12V/5Ah type. Use thespare light (12V/15W) for replacement Callusat82-70-8100-5525 forquestion.
   caution : Make sure to connect the internal battery power connectorafter installation

HID emergency light